IsoHertz By Vinylspot Premiere At AV Show Warsaw 2026

October 21, 2026

ISOHERTZ BY VINYLSPOT AT AUDIO VIDEO SHOW WARSAW 2026

IsoHertz By Vinylspot Premiere At AV Show Warsaw 2026

Vinylspot will present the public premiere of IsoHertz at Audio Video Show Warsaw 2026.

The Warsaw-based vinyl and analogue specialist has developed the IsoHertz range of vibration isolators for loudspeakers, audio components and turntables, with configurations selected according to the mass of each component and the frequency range where vibration transfer needs to be reduced.

IsoHertz is a continuation of Vinylspot’s patented 10Hertz turntable platform project, with the new range designed to address vibration from around 20Hz.

ISOHERTZ V VIBRATION ISOLATORS

The IsoHertz V range is intended for loudspeakers and audio components, with seven models covering equipment weighing between 3kg and 60kg. The isolators are supplied as sets of four.

According to Vinylspot, isolation starts at 20Hz for heavier loudspeakers and at around 25–30Hz for lighter models. The V7 model uses a 50mm double elastic layer for heavier equipment.

The company says each IsoHertz configuration has been selected using vibroacoustic calculations for a defined mass range, with the aim of reducing vibration transfer.

ISOHERTZ T FOR TURNTABLES

The IsoHertz T range has been developed specifically for turntables, which both generate and respond to mechanical vibration. It combines a 25mm elastic layer for low-frequency isolation with a 12.5mm damping layer intended to absorb impacts and shocks.

Three models cover turntables weighing from 5kg to 24kg, with isolation starting at between 18Hz and 25Hz depending on the turntable’s mass. Each set also includes black HIPS levelling plates for turntables with an off-centre centre of gravity.

For turntables weighing more than 24kg, Vinylspot offers its 10Hertz platform, which is designed to isolate from 10Hz.

ISOHERTZ AND DIFFERENT FLOOR TYPES

Vinylspot also highlights the importance of the structure beneath the floor when choosing between spikes and isolators. The company says spikes can work well on massive concrete or stone slabs, where floor movement is limited, while isolators may be more suitable for suspended timber floors, joists, floorboards, floating laminate, or stone and tiles installed over timber structures.

ISOHERTZ AT AUDIO VIDEO SHOW WARSAW 2026

The public premiere will include demonstrations of IsoHertz V and IsoHertz T, together with an explanation of how the isolators work and why matching them to equipment mass is important. Show sales and special show discounts will also be available, with free test samples offered to interested editors and reviewers.

IsoHertz V and IsoHertz T are priced from PLN 100 to PLN 350 per set of four, depending on the model. They will be available from Vinylspot and at the show. Vinylspot will be exhibiting at Audio Video Show Warsaw 2026, at the Radisson Blu Sobieski Hotel, Vinyl Zone, ground floor