17. April 2024 · Comments Off on Axxess L1 And L3 Speakers, Axxess Cable Loom And Axxess Noir Resonance Device · Categories: Hifi News · Tags: , , , , , ,

NEW RANGE OF AXXESS PRODUCTS FROM AUDIO GROUP DENMARK

Audio Group Denmark Axxess L1 And L3 Speakers, Axxess Cable loom And Axxess Noir Resonance Device

Last year Audio Group Denmark launched the Axxess Forté streaming amplifier series, the start of their new entry level brand.

Audio Group Denmark spon banner

Michael Børresen told us when we visited them in Aalborg, Denmark, just before the Axxess Forté launch, that the accessibly priced Audio Group Denmark brand would grow and include loudspeakers, cables and accessories, now we can reveal more.

AXXESS RANGE EXPANSION

Audio Group Denmark is expanding the Axxess range with the launch of two loudspeakers, a series of cables and finally a resonance control device to position under your loudspeakers and electronics.

Audio Group Denmark says their overarching dream and vision for Axxess is to share emotional musical moments with even more people. Based on the innovative technological development and design traditions of Ansuz, Aavik and Børresen, Axxess manufactures high-quality loudspeakers, amplifiers, audio cables, and HiFi accessories, that Audio Group Denmark’s dealers can sell at a more modest price, and by that making high end HiFi accessible to more people. Despite the modest price, the brand says that Axxess products attain the standard of musical performance and aesthetic design for which Ansuz, Aavik and Børresen is famous.

AXXESS L1 AND L3  LOUDSPEAKERS

The two new Axxess loudspeaker models are the stand mounted Axxess L1 and the floorstanding Axxess L3. They are both developed and designed by the Børresen engineering team led by Michael Børresen and accompanied by Flemming Erik Rasmussen. The speakers are developed with the same overall criteria in terms of sound and design philos ophy as Børresen loudspeakers. The components and technologies used in the L1 and L3 are carefully developed and applied to both models.

THE AXXESS RIBBON TWEETER

The membrane in the new ribbon tweeter is in Kapton – which is a very lightweight material. Compared to a dome tweeter it is 25 times lighter and due to the ribbon tweeter principle, the area is two times bigger.

THE BASS MIDRANGE

In the Axxess loudspeaker magnet motor system, the Danish HiFi brand use double copper caps on the pole rings to achieve high flux and low inductance. They have adopted the use of copper caps from the Børresen X-series. The Axxess loudspeaker membrane is designed inhouse and is developed to achieve maximum stiffness with minimum noise.

THE AXXESS CABINET

The Axxess L1 and L3 speakers’ cabinet and baffle are made of natural based composite material. This material choice is an important characteristic and is designed to eliminate sonic distortion, the finish is available in either painted satin black or white.

THE AXXESS SPEAKER STAND

The Axxess L1 speaker stand is like the cabinet also made of natural based composite material. The Axxess L1 stand incorporates both functional and visual elements inspired by both Ansuz, Aavik and Børresen

AXXESS L1 STANDMOUNTED LOUDSPEAKER SPECS

Dimensions: 43,0 x 21,5 x 32,0 cm / 16,9 x 8,3 x 12,6 inch

With stand: 114,0 x 30,0 x 37,4 cm / 49,2 x 11,8 x 14,7 inch

Weight – speaker: 10,3 kg / 22,7 lbs

Weight – speaker with stand: 22,0 kg / 48,5 lbs

L3 FLOORSTANDING LOUDSPEAKER SPECS

Dimensions: 125,0 x 30,0 x 41,0 cm / 49,2 x 11,8 x 16,1 inch

Weight: 30,2 kg / 66,6 lbs

AXXESS CABLE LOOM

In their endeavour to establish a full Axxess setup, AGD are introducing a cable series, drawing upon Ansuz’s design and development heritage, and their focus on noise reduction and resonance control.

These cables offer entry into the Audio Group Denmark universe at a more accessible price point.

The housings of the Axxess cable series are crafted from a mineral-filled composite material. For the conductors and ground wires, they have used from shielded silver-plated copper. Axxess cables are available in the following cable types: Power Cable, Interconnect Cable, Speaker Cable, Digital Interconnect and Ethernet Cable.

AXXESS NOIR RESONANCE CONTROL DEVICE

The Axxess Noir resonance control devices are built on the same principles as the Ansuz Darkz devices. The Axxess Noir device is made from a special mineral-filled composite

material that Audio Group Denmark says preserves the music signal. The resonance control devices are designed to enhance the listening experience by minimizing unwanted vibrations.

AXXESS CABLES, SPEAKER AND RESONANCE DEVICE PRICE AND AVAILABILITY

Power Cable: From 1.0 m (EU/US configuration) 350€ $385

Interconnect RCA: from1.0 m 240€ $264

Speaker Cables: From 2 x 3.0 m (banana plugs) 750€ $825

Digital Interconnect BNC : From 1.0 m 175€ $193

Ethernet Cable: From 1 m CAT8 320€ $352

Axxess L1: 2,500€ $2,750 L1 Stand: 1,000€ $1100

Axxess L3: 5,000€ $5,500

Axxess Noir Resonance control device Set of 4 pcs. 550€ $605

All Axxess products are available from April 2024

HiFi PiG Says: We are very excited to see the expansion of the Audio Group Denmark Axxess range of products, we predict them being very popular indeed.

Audio Group Denmark spon banner

AXPONA 2024 Report Part 1
Luxman And Magico At AXPONA 2024

Read More Posts Like This

  • AUDIO GROUP DENMARK BRANDS (AAVIK, ANSUZ AND BØRRESEN) EVENT WITH AUDITORIUM HIFI OXFORD Auditorium HiFi of Oxford is organising an exclusive audio event collaborating with Audio Group Denmark, which you…

  • TELLURIUM Q BLACK II POWER CABLE NOW AVAILABLE British cable brand Tellurium Q has released the new Tellurium Q Black II power cable. Outwardly, it looks a lot like the…

  • CHORD COMPANY CLEARWAY POWER CABLE HAS BEEN DESIGNED AS A ‘FIRST STEP' UPGRADE. British cable brand Chord Company has launched its entry-level Chord Clearway Power. Clearway Power has been designed…

Comments closed.